Home_NBanner

C.C.Steven and Associates, 1363 Donlon Street, Ventura, CA  93003  since 1978  

ph:  805-658-0207       fax:  805-658-2789         static@ccsteven.com

In-Plant  Handlers    Custom In - Plant Handlers    Nesting Totes 
Storage  Containers    Tek-Mate Work Surface    Board Handling Trays    Tek-Trays
Super Tek Trays    Lead Chip Carrier   Trash Receptacles

In-Plant  Handlers...Over 250 Sizes in Stock!  Call with your part size and we will fit you into an appropriate size.

Protektive Pak has the world's largest selection of ESD-SAFE  In  - Plant Handlers... Available For Same Day Shipment.  Call C.C.Steven at 805-658-0207 with your board dimensions, and we'll put you in the appropriately configured STOCK  In-plant Handler quickly.

In Plant Handlers

  • The advantage of  PROTEKTIVE  PAK In - Plant Handler's, used by companies worldwide are:
  • Impregnated corrugated material; greater durability than coated or printed  material
  • Static dissipative surface of 10 to 7 -10 to 10 Ohms/square - minimizing the potential of sparking and  tribo - charging
  • Buried shielding layer - minimizing the potential of sloughing and rub-off  contamination
  • Providing complete ESD and physical protection for static sensitive circuit  boards
  • Eliminating static shielding bags (which are not recyclable)
  • No tooling cost
  • Constructed with double sides, triple ends, and double thickness bottom for  greater durability
  • Roll - over (double thickness), reversible, and adjustable partitions
  • Easy assembly without the need for tape, glue, or staples
  • Made from 100% recycled material, that is 100% recyclable
Also available with  optional:
Perimeter reinforcing rings available
  1. Steel wire perimeter reinforcing frame for extra strength
  2. Permanently static dissipative crosslink circuit boards
  3. Conductive plastic handles
Back to Top
Custom In -  Plant Handlers
By utilizing stock components  from our large inventory of In-Plant Handlers, customizing an In-Plant Handler  becomes much more AFFORDABLE.

 Custom dividers
Customizing In-Plant  Handlers can be as simple as lowering the depth of the partitions in a deep box;  or by designing one custom partition to use with other stock partitions and  stock boxes can minimize the tooling expense.

Thermoformed side ribs
Thermoformed conductive  ribs can be laminated into stock boxes allowing either the circuit boards or the  partitions to be held in place by the ribs for adjustable cell  size.

Custom foam inserts
Grooved or die cut static  dissipative foam can hold either circuit boards or  partitions.

 Conductive Plastic available
Custom plastic conductive  corrugated box with our stock partitions or our stock PROTEKTIVE PAK box with custom plastic corrugated  partitions.

Whether our packaging engineers design a custom In-Plant Handler utilizing  some of our stock components or a completely new design is engineered for your  unique requirements, we have the capabilities and facilities to provide you a  cost effective ESD packaging solution.

Stack & Nest Totes

Nest & Stack Totes
  • Used to transport or store ESD sensitive items
  • When operators carry the totes, conductive handles provide path to ground
  • Easy-to-rotate steel arms for stacking; saves valuable space
  • Added durability and strength provided by steel perimeter frame
  • No assembly required on most sizes; easy assembly on the others, without the need for tape, glue, or staples
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination.
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Identified with ESD Protective Symbol (Ref: ESD 8.1)
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

18 x 12 x 6 o.d., 15 x 8-3/4 i.d.base

H724-62A

8

 $ 32.90

ORDER NOW

27-1/4 x 12 x 6 o.d., 24-1/2 x 8-3/4 i.d.base

H726-62A

8

 $ 34.87

ORDER NOW

27-1/4 x 18 x 6 o.d., 24-1/2 x 15 i.d.base

H728-62A

8

 $ 36.06

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Nesting Totes

Nesting Totes
  • Used to transport or store ESD sensitive items
  • When operators carry the totes, conductive handles provide path to ground
  • Added durability and strength provided by steel perimeter frame
  • No assembly required on most sizes; easy assembly on the others, without the need for tape, glue, or staples
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination.
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Identified with ESD Protective Symbol (Ref: ESD 8.1)
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

12 x 9 x 4 o.d., 8-3/4 x 5-3/4 i.d.base

H702-42A

25

 $   5.61

ORDER NOW

18 x 12 x 6 o.d., 15 x 8-3/4 i.d.base

H704-62A

8

 $ 15.93

ORDER NOW

27-1/4 x 12 x 6 o.d., 24-1/2 x 8-3/4 i.d.base

H706-62A

8

 $ 17.24

ORDER NOW

27-1/4 x 18 x 6 o.d., 24-1/2 x 15 i.d.base

H708-62A

8

 $ 21.29

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Storage Containers

Storage Container
  • Provides ESD and physical protection for ESD sensitive components and devices.
  • Available options include: (1) Lid; (2) Steel reinforcing frame for additional strength and durability; (3) Conductive handles; (4) Static dissipative bottom foam pad for cushioning to reduced stress from physical shock
  • Constructed with double sides, triple ends, and double thickness bottom for greater durability.
  • No tooling costs. Easy assembly without the need for tape, glue, or staples
  • Impregnated corrugated material; greater durability than coated or printed material.
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer, minimizes sloughing and rub-off contamination.
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Identified ESD Protective Symbol (Ref: ESD 8.1)
  • Made in America

Description

Part #

Unit Price

Description

Part #

Unit Price

 

16-7/8 x 10 x 3-1/2 i.d.

 H411-BX

 $   7.14

ORDER NOW

18-5/8 x 15 x 10 i.d.

H460-BX

 $ 17.20

ORDER NOW

16-78 x 10 x 5-3/8 i.d.

 H401-BX

 $   7.84

ORDER NOW

18-5/8 X 15 X 12 i.d.

H 462BX

 $ 18.34

ORDER NOW

17 x 9-7/8 x 2-1/2 i.d.

 H422-BX

 $   4.86

ORDER NOW

18-5/8 x 15 x 14 i.d.

H464-BX

 $ 19.47

ORDER NOW

17 x 9-7/8 x 7-5/8 i.d.

 H400-BX

 $   9.03

ORDER NOW

18-3/4 x 12-5/8 x 6-3/4 i.d.

H 456-BX

 call

 

17 x 9-7/8 x 11-5/8 i.d.

 H402-BX

 $ 11.06

ORDER NOW

18-3/4 x 12-5/8 x 8-3/4 i.d.

H458-BX

 call

 

17 x 13 x 12-5/8 i.d.

 H403-BX

 $ 19.98

ORDER NOW

18-3/4 x 12-5/8 x 10-3/4 i.d.

H459-BX

 call

 

17 x 13 x 6-3/4 i.d. 

 H436-BX

 $ 12.33

ORDER NOW

18-3/4 x 12-5/8 x 14-3/4 i.d. 

H455-BX

 call

 

17 x 13 x 8-3/4 i.d.

 H438-BX

 $ 13.35

ORDER NOW

18-7/8 x 12-5/8 x 18-3/4 i.d.

H405-BX

 $ 18.34

ORDER NOW

17 x 13 x 10-3/4 i.d.

 H439-BX

 $ 14.22

ORDER NOW

22-7/8 x 12-7/8 x 6 i.d.

H446-BX

 $ 12.97

ORDER NOW

17 x 13 x 14-3/4 i.d.

 H434-BX

 call

 

22-7/8 x 12-7/8 x 8 i.d.

H448-BX

 $ 13.83

ORDER NOW

18-3/8 x 12-1/2 x 12-3/4 i.d.

 H452-BX

 $ 15.30

ORDER NOW

22-7/8 x 12-7/8 x 10 i.d.

H440-BX

 $ 14.99

ORDER NOW

18-3/8 x 12-1/2 x 17-1/8 i.d.

 H457-BX

 $ 17.39

ORDER NOW

22-7/8 x 12-7/8 x 12-5/8 i.d.

H404-BX

 $ 17.08

ORDER NOW

18-5/8 x 15 x 5-7/8 i.d.

 H406-BX

 $   9.75

ORDER NOW

22-7/8 x 12-7/8 x 15-1/4 i.d.

H445-BX

 $ 18.01

ORDER NOW

18-5/8 x 15 x 8 i.d.

 H468-BX

 $ 16.06

ORDER NOW

22-7/8 x 12-7/8 x  18-1/4 i.d.

H408-BX

 $ 19.86

ORDER NOW

 Lid for boxes beginning with H42

H42LD

 $ 3.92

ORDER NOW

 Lid for boxes beginning with H43

H43LD

 $ 4.62

ORDER NOW

 Lid for boxes beginning with H44

H44LD

 $ 5.12

ORDER NOW

 Lid for boxes beginning with H45

H45LD

 $ 4.56

ORDER NOW

 Lid for boxes beginning with H46

H46LD

 $ 4.94

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Tek-Mate Worksurfaces

Tek-mate Work Surface
  • Portable ESD worksurface that can also be used to transport populated but unsoldered circuit boards
  • Static dissipative foam (RTT 106 - 107 ohms) laminated to Protektive Pak® corrugate
  • Foam is shuntable so board leads can be kept at equipotential
  • Includes 10mm (3/8") male or female grounding snap
  • Lightweight, thin, yet durable
  • Fits most transportation carts
  • Impregnated corrugated material; greater durability than coated or printed material.
  • Static dissipative material 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination
  • Made from 100% recycled material, and is 100% recyclable
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

12” x 18”, Male Snap

 HTM 1218M

12

 $ 14.29

ORDER NOW

12” x 18”, Female Snap

 HTM 1218F

12

 $ 14.29

ORDER NOW

18” x 24”, Male Snap

 HTM 1824M

6

 $ 26.24

ORDER NOW

18” x 24”, Female Snap

 HTM 1824F

6

 $ 26.24

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Board Handler Trays

Board Handler Tray
  • Used to transport or store ESD sensitive items
  • Static dissipative foam (RTT 106 - 107 ohms) laminated to bottom
  • Foam bottom is shuntable so board leads can be kept at equipotential
  • No assembly required
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

17-3/4 x 10-3/4 x 2-1/8

 HBH-42LD

10

 $ 12.73

ORDER NOW

17-7/8 x 13-5/8 x 2-1/8

 HBH-43LD

10

 $ 15.03

ORDER NOW

23-1/2 x 13-3/8 x 2-1/8

 HBH-44LD

10

 $ 17.42

ORDER NOW

19-3/8 x 15-3/4 x 2-1/8

 HBH-46LD

10

 $ 16.63

ORDER NOW

19-1/16 x 13--1/8 x  2-1/8 

 HBH-45LD

10

 $ 15.03

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Tek Trays

Tek Tray
  • Used to transport or store ESD sensitive items
  • Static dissipative foam (RTT 106 - 107 ohms) laminated to bottom
  • Foam bottom is shuntable so board leads can be kept at equipotential
  • No assembly required
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

18 x 11-3/8 x  1-3/4

 HSBH-100

10

 $ 13.83

ORDER NOW

24 x 18 x  2-1/8

 HSBH-200

5

 $ 26.90

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Super Tek Trays

Tek Trays Super
  • Used to transport or store ESD sensitive items
  • Static dissipative foam (RTT 106 - 107 ohms) laminated to bottom
  • Foam bottom is shuntable so board leads can be kept at equipotential
  • Steel wire frames or plastic corners allow trays to be stacked, improving productivity and saving valuable space
  • No assembly required
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination
  • Made from 100% recycled material, and is 100% recyclable
  • Reusable, ensuring best value
  • Identified with ESD Protective Symbol (Ref: ESD 8.1)
  • Made in America

Description

Part Number

Case Qty

Unit Price

 

18 x 11-3/8 x  1-3/4 with wire frames

 HSBH-100W

10

 $ 25.15

ORDER NOW

18 x 11-3/8 x  1-3/4 with plastic corners 

 HSBH-100P

10

 $ 25.37

ORDER NOW

24 x 18 x  2-1/8 with wire frames 

 HSBH-200W

5

 $ 41.72

ORDER NOW

24 x 18 x  2-1/8 with plastic corners  

 HSBH-200P

5

 $ 41.72

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Lead Chip Carrier

Lead Chip Carrier
  • For handling, storing, or shipping small components
  • Thermo-formed conductive plastic
  • Stackable
  • Reusable, ensuring best value*
  • Outer shipping boxes available
  • Made in America

Description

Part #

Unit Price

 

 Overall  Lx W xD

 Cell Size Lx W xD (# of cells)

 

12-9/16 x 4 x  7/16

29.5mm x 23mm x 6.75mm or  1.15" x .9" x .275" (27)

HTFT-1

 $ 5.22

ORDER NOW

12-9/16 x 4 x  7/16

39.6mm x 34.5mm x 6.55 or  1.56" x 1.35" x .255" (14)

HTFT-2

 $ 5.22

ORDER NOW

12-9/16 x 4 x  7/16

14.9mm x 14.55mm x 6.75mm  or .59" x .55" x .275" (68)

HTFT-3

 $ 5.22

ORDER NOW

12-9/16 X 4 X  7/16

80.75mm X  26.6mm (10)

HTFT-4

 $ 5.22

ORDER NOW

12-9/15 x 4 x  7/16

34.65mm x 11.75mm x 6.65mm  or 1.36" x .475" x .265" (36)

HTFT-5

 $ 5.22

ORDER NOW

4-5/16 x 4-5/16 x  5/16

13mm x 8.2mm or .5" x .5" x  .32" (25)

HTFT-6

 $ 1.48

ORDER NOW

4-5/16 x 4-5/16 x  5/16 

16.3mm x 13.2mm x 8.2mm or  .63" x .52" x .32" (25)

HTFT-7

 $ 1.48

ORDER NOW

4-5/16 x 4-5/16 x  5/16 

20.2mm x 13.1mm x 8.2mm or  .82" x .51" x .32" (20)

HTFT-8

 $ 1.48

ORDER NOW

4-5/16 x 4-5/16 x  5/16 

28.3mm x 28.3mm x 8.2mm or  1.13" x 1.13" x .32"(5)

HTFT-9

 $ 1.48

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $ 5.00

Trash Receptacles

Trash Receptacle

Economical ESD protective product to replace high charging plastic trash cans

  • Antistatic, low charging dissipative surface
  • Constructed with double sides, triple ends, and double thickness bottom for greater durability
  • Steel reinforcing frame provides additional strength and durability
  • Conductive plastic handles provide ease of handling along with reliable ESD control path-to-ground
  • Chemical resistant
  • Identified with ESD Protective Symbol (Ref: ESD 8.1)
  • Easy assembly without the need for tape, glue, or staples
  • ESD protective liners also available
  • Impregnated corrugated material; greater durability than coated or printed material
  • Static dissipative surface of 107 - 109 ohms
  • Buried shielding layer minimizes sloughing and rub-off contamination
  • Made from 100% recycled material, and is 100% recyclable
  • Trash can liners are 1.5 mil thickness
  • Made in America

Description

Part Number

Unit Price

 

13-1/2 x 12 x 13-1/4 Trash Receptacle with wire frame & handles, 9.2 gallons

HTR913WH

$ 18.70

ORDER NOW

13-1/2 x 12 x 13-1/4 Trash Receptacle, 9.2 gallons

HTR913BX

$ 12.23

ORDER NOW

22-7/8 x 12-7/8 x 32 Trash Receptacle with wire frame & handles, 40 gallons

HTR932WH

$ 47.48

ORDER NOW

22-7/8 x 12-7/8 x 32 Trash Receptacle, 40 gallons

HTR932BX

$ 32.76

ORDER NOW

10 Gallon Trash Liner, 26 x 24, package of 50

HTR913LNR

$ 25.11

ORDER NOW

55 Gallon Trash Liner, 22 x 16 x 58, package of 50

HTR932LNR

$ 84.21

ORDER NOW

Pricing shown for small quantities and for reference only.  Call C.C.Steven for price breaks.  Order in multiples of case quantities, not combinable.  Orders for less than case quantity  will be charged a broken case fee of $5.00

Back to Protektive Pak
Back to Material Handling

Visit our other sites to further enhance your manufacturing operations.  Click on a button below: