ph:  805-658-0207          fax:  805-658-2789            static@ccsteven.com

Air Assist PulseBar NEW DESIGN
The NEW AirAssist PulseBar features a special emitter pin configuration which significantly enhances the bar’s neutralizing and balance performance. The configuration includes an emitter pairing at each end to eliminate potential single polarity hot spots at either end of the bar, and increased emitter quantity in most sizes.
Emitter pins are now machined tungsten, not tungsten wire for greater durability and longevity.  Silicon CArbide pins are now an option for ultra clean applications.

The AirAssist PulseBar connects to compressed air  lines and eliminates troublesome  electrostatic charges that can cause dust and other contaminants to accumulate  on surfaces and finished product. The flow of air over the electrodes carries the ionization to the surface to be neutralized. It can be mounted 2 to 3 feet from the target area and is available in  standard lengths from 12 to 74 inches.
Featuring a slimline design, the rugged  AirAssist PulseBar can be installed on many types of equipment. It can operate in Steady State operating mode or Pulsed DC operating mode using the PulseFlow Controller.  It is easily maintained.

Specification: Size (W x H x D) 0.95" x 1.2" x varied length (2.4 cm x 3.0 cm x  length) Weight Cable Length 7 ft. (2.1m) Air Supply 100 psi, clean dry air Material ABS plastic/anodized aluminum Operating Temperature Range 24 to 158 F (-10 to 70 C) Air Inlet: 1/4" O.D. tube, push-in  type

Air Assist PulseBar Products and Accessories

Description Part Number Unit Price 12" Air-Assist PulseBar  with 7 Tungsten emitters. IRPBAT12 $  310.00 24" Air-Assist PulseBar  with 7 Tungsten emitters. IRPBAT24 $  360.00 36" Air-Assist PulseBar  with 11 Tungsten emitters. IRPBAT36 $  550.00 44" Air-Assist PulseBar  with 15 Tungsten emitters. IRPBAT44 $  650.00 64" Air-Assist PulseBar  with 19 Tungsten emitters. IRPBAT64 $  835.00 74" Air-Assist PulseBar  with 19 Tungsten emitters. IRPBAT74 $  900.00 12" Air-Assist PulseBar  with 7 Ultraclean emitters. IRPBAS12 $  485.00 24" Air-Assist PulseBar  with 7 Ultraclean emitters. IRPBAS24 $  535.00 36" Air-Assist PulseBar  with 11 Ultraclean emitters. IRPBAS36 $  650.00 44" Air-Assist PulseBar  with 15 Ultraclean emitters. IRPBAS44 $  745.00 64" Air-Assist PulseBar  with 19 Ultraclean emitters. IRPBAS64 $  935.00 74" Air-Assist PulseBar  with 19 Ultraclean emitters. IRPBAS74 $  985.00 PFC-20 PulseFlow Controller, 115V IRPF100 $  458.00 PFC-20 PulseFlow Controller, 230V IRPF200 $  460.00 Spare Parts YQC 2-to-1 Air Quick Connector 5050540 $    13.00 HV2 2-to-1 connector (splitter) 5050538 $    60.00 HV4 4-to-1 connector (splitter) 5050539 $    70.00 0.10 Hex electrode 4105797 $      6.00 PGF1 0.22 micron in-line pre-filter 4105775 $    48.00

Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.