|
M60A TWO STATION WRIST STRAP MONITOR SYSTEM
The M60A Two Station Wrist Strap Monitor System continuously monitors one or two ESD work surfaces and
one or two conductive wrist straps to detect loss of continuity. Conditions such as ungrounded work surfaces, broken or disconnected coil cords, unsafe paths to ground, and improper wearing of grounding equipment by
operators are detected instantly to alert the operator to take corrective action before serious and expensive losses occur due to ESD and grounding faults.
The compact M60A independently monitors two work stations with a common control/alarm module.
Individual green “status OK” and red “fault” LEDs for each work station, operator and work surface give continuous indication of work surface and wrist strap/coil cord grounding status.
An audible alarm sounds to alert the operator when a failure condition is detected. Each satellite module
has an additional grounding jack for visitors.
- Features
Continuous, independent monitoring of one or two work stations
Individual status indicators with audible and visual alarms Instant detection of wrist strap and coil cord intermittence and failures
- Benefits
Operates with all wrist straps/ground leads using standard banana plugs
Each channel is activated when wrist strap is plugged into the monitor Satisfies ISO 9000 requirements
- TECHNICAL DATA
- *Instant detection of wrist strap and coil cord intermittence and failures.
*Continuous, independent monitoring of one or two workstations. *Individual status indicators with audible alarm. *
Operates with all wrist straps/ground leads using standard banana plugs. *Visitor jacks in each satellite module. *
Each operator channel is activated when wrist strap is plugged into the monitor.
|