|
Model 431 Shielded Bag Test System
Model 910 Electrostatic Discharge Simulator (Device Testing)
Model 930D Electrostatic Discharge Simulator
Model 930D-FTS Firing Test Set Electrostatic Discharge Simulator
Model 431 Shielded Bag Test System -
 Description-The Model 431 Shielded Bag Test System is
designed to perform ESD STM11.31 and EIA-541 tests when used in conjunction with a high speed oscilloscope and computer. The system provides the discharge pulse and the
resulting attenuated voltage output for direct connection to a 2-channel oscilloscope for EIA-541 testing, or a current pulse for the ESD STM11.31 test.
The Model 431 consists of an adjustable 800 to 1200 Volt
power supply with a 3½ -digit LCD display, 100 pf/ 1500 Ohm HBM network (200 pf/1500 Ohm for EIA-541), a mercury wetted charge/ discharge relay, capacitive sensor and a controlled force discharge electrode. Adjustable bag
insertion stops enable the user to configure the System for different bag sizes per specification. A Tektronix CT-1 current sensor with 500 Ohm resistor, and built-in 100:1 voltage attenuators are standard for
interfacing the System with an appropriate user supplied oscilloscope. (50 MHz, 100 MS/s for EIA-541; 200 MHz, 1GS/s with computer interface for ESD STM11.31.)
Multicolored LED point sources indicate CHARGE,
DISCHARGE and TEST OVER functions. The FUNCTION
switch is used to select either a voltage differential
(EIA-541) or a current pulse (ESD S11.31) measurement.
The discharge is initiated by either a front panel discharge
switch or by a foot operated switch which is convenient
when testing in a humidity chamber.
A computer interface enables the discharge sequence specified in ESD STM11.31 to be automatically
controlled by the ETS Test Suite Manager Program. The discharge of the Model 431 meets the requirements of ESD S5.1 “Electrostatic Discharge Sensitivity Testing-Human Body Model.” Plug-in R/C
components allows other networks to be used. Cables are provided for interfacing the Model 431, oscilloscopes and computer parallel port.
The Test Suite Manager Program displays the waveforms, calculates the energy of the discharge pulse induced inside the test bag and processes the data in accordance with ESD STM 11.31. It also
automatically controls the Model 431 and program the oscilloscope.
* Performs energy tests per ESD S11.31
* Performs voltage tests per EIA-541 & MIL-PRF-81705D
* Voltage adjust: 800 to 1200V
* 3½ digit LCD voltage readout
* Oscilloscope interface outputs
* 110/220 Volt operation
* Energy calculation program
Specifications Model 431, pdf, 63kB
Model 910 Electrostatic Discharge Simulator (Device Testing) -
 Description- The 910 is a completely integrated system used to
determine ESD susceptibility level of electronic devices up to ±8kV in accordance with Mil-Std 883C Method 3015 and ESD S5.1 and 5.2. Plug-in RC Networks allow the simulator to simulate Human Body and Machine Models.
The Model 910 features an adjustable power supply that can perform testing from ±20 to ±8kV in either manual or automatic modes. Optional DUT Boards are available to simplify testing of a wide variety of devices.
* Voltage Range +or- 20 to 8000 V
* 3½ digit LCD voltage readout
* Plug in R/C Networks
* 1500ohm/150pf HBM (std.) 0ohm/200pf MM (std.)
* Custom R/C Networks
* Manual/Automatic Modes
* Tests most device configurations
* Meets Mil Std. 883E & ESD S5.1
900 Series Specifications, pdf, 232kB
Model 930D Electrostatic Discharge Simulator
Description-The Model 930D produces ESD pulses from ±500
to ±26kV (Optionally ±30kV). Select either the 1.5k ohm/ 100pf Human Body Model (HBM) Network, IEC 1000-4-2/801-2 (1991& 1984) or from a variety of automotive, electronic and military plug-in R/C networks.
The Model 930D is composed of a controller and a gun connected by a detachable 12-ft cable. The control unit houses the low voltage power supply with LED status indicators, system
timing electronics, a .5” LED display and controls for the AUTO MODE event counter and a high voltage power supply. In addition, a set of Charge/ Discharge controls are provided for remote operation.
The gun contains the high voltage power supply and high voltage relay plus plug- in resistor and capacitor networks. It incorporates high voltage ON/OFF, MANUAL/ AUTO and RELAY/AIR discharge controls along
with LED status indicators. A ¼-20 threaded hole enables the
gun to be mounted to a tripod.
The system has four modes of operation: AUTO COUNT, FREE RUN, MANUAL and AIR DISCHARGE. Air
Discharge and Manual operations are controlled by the switches on the gun. The Model 930D includes 0.50” diameter elliptical (finger tip) and conical point probe tips, standard banana jack adapter and a 2-meter
ground cable, contained in a sturdy polystyrene carrying case.
* Voltage range: ±500 to 26,000 V
* Plug-in R/C networks
* 1500 Ω?/100 pf HBM (Mil Std. 883E) 330 Ω?/150 pf (IEC 1000-4-2/801-2)
* Custom networks available
* Contact & air discharge
* Remote discharge capability
* Optional E & H-Field Probes
* Optional IEC 1000-4-2/801-2 Test Target
900 Series Specifications, pdf, 232kB
Model 930D-FTS Firing Test Set Electrostatic Discharge Simulator -
Description-The Model 930D-FTS is an ESD Simulator
designed to test the ESD susceptibility level of ordnance and explosive devices such as automotive pretensioner and pyrotechnic systems. This instrument incorporates the same versatile features as the Model 930D plus modified
discharge unit including Mil Std-1512 & 1576 R/C networks of 0 and 5k Ohm and 500 pf. The Model 930D-FTS can be customized to meet any ESD or high voltage pulse generator application.
* Model 930D capabilities PLUS
* Plug-in R/C networks 0Ω/500 pf Mil Std. 1576 (Std.) 5000Ω/500 pf Mil Std. 1512
(Std.) Custom Networks
* Universal discharge unit
900 Series Specifications, pdf, 232kB
|
