ph:  805-658-0207          fax:  805-658-2789            static@ccsteven.com

StatMat 2-Ply Rubber

 STATIC-GARDE WPR Static dissipative floor mats are constructed of 2-ply rubber with reflection breaking embossed surface to reduce glare. The static dissipative top layer is backed by a conductive layer to deliver outstanding electrical performance.  The WPR offers excellent resistance to hot solder, soldering irons, and most solvents.

Static-Garde WPR runners are packaged 50 foot per roll in widths of 36", and 48". Orders will be cut to desired lengths from these standard length rolls.

Install using Sigaway Original adhesive netting, Siga Circuit and Siga Copper Tape or Sigaway Electronic and Siga Copper Tape

Specification: Resistance to Groundable Point: 1x10E6 < Rtg < 1x10E8 Resistance between Two Points on Surface: 1x10E7 < Rtt < 1x10E9 Charge Decay from 5Kv to 50V: (FTMS 101C Method 4046)  <0.01 seconds Hardness 75 +or- 5 Shore A Heat Resistance: Excellent Chemical Resistance: Excellent

WPR StatMat 2-Ply Rubber Products and Accessories

Description	Part Number	Linear Foot Price
36”wide StatMat 2-Ply Rubber matting, Blue	WPR1836	$ 13.65
48”wide StatMat 2-Ply Rubber matting, Blue	WPR1848	$ 17.60
36”wide StatMat 2-Ply Rubber matting, Gray	WPR5836	$ 13.65
48”wide StatMat 2-Ply Rubber matting, Gray	WPR5848	$ 17.60
Accessories
*One (1) ground lead is recommended for each 10 linear feet for optimum performance. Low Profile Ground leads must be attached to the mats with 3/8" Female snaps, part number GWHC30F or GWHC31F

Questions? Ready to Order?  E-mail or Contact C.C.Steven at 805-658-0207.

Back to Flooring