ESD Products.biz

C.C.Steven and Associates, 1363 Donlon Street, Ventura, CA  93003 since 1978  

ph:  805-658-0207          fax:  805-658-2789            static@ccsteven.com

2-Ply Rubber MattingStatMat 2-Ply Rubber

 STATIC-GARDE WPR Static dissipative table mats are constructed of 2-ply rubber with reflection breaking embossed surface to reduce glare.  The static dissipative top layer is backed by a conductive layer to deliver outstanding electrical performance.  The WPR offers excellent resistance to hot solder, soldering irons, and most solvents.

Static-Garde WPR runners are packaged 40 foot per roll in widths of 24" and 36", and 48". Orders will be cut to desired lengths from these standard length rolls.

Now Available: 30 width in color GREEN: Easily identify your Lead-free workstations with this standout green ESD matting.

Specification:

Resistance to Groundable Point:

1x10E6 < Rtg < 1x10E8

Resistance between Two Points on Surface:

1x10E7 < Rtt < 1x10E9

Charge Decay from 5Kv to 50V:

(FTMS 101C Method 4046)  <0.01 seconds

Durometer Shore A:

75 +or- 5

Heat Resistance:

Excellent

Chemical Resistance:

Excellent

WPR StatMat 2-Ply Rubber Products and Accessories

Description

Part Number

Linear Foot Price

30”wide StatMat 2-Ply Rubber matting, GREEN

WPR7830

$ 13.65

24”wide StatMat 2-Ply Rubber matting, Blue

WPR1824

$  9.55

36”wide StatMat 2-Ply Rubber matting, Blue

WPR1836

$ 13.65

48”wide StatMat 2-Ply Rubber matting, Blue

WPR1848

$ 17.60

24”wide StatMat 2-Ply Rubber matting, Gray

WPR5824

$  9.55

36”wide StatMat 2-Ply Rubber matting, Gray

WPR5836

$ 13.65

48”wide StatMat 2-Ply Rubber matting, Gray

WPR5848

$ 17.60

Accessories

 

 

*One (1) ground lead is recommended for each 10 linear feet for optimum performance. Common Point Ground leads must be attached to the mats with 3/8" Female snaps, part number GWHC30F or GWHC31F

Questions? Ready to Order?  E-mail or Contact C.C. Steven at 805-658-0207.

Back to Workstations

Visit our other sites to further enhance your manufacturing operations.  Click on a button below: